Detailed Product Descrition :
1394card
The product offers three port outside and one port inside. Compliant with IEEE1394-1995
Standard for High performance serial Bus and 1394A supplement ver. 4.0.
1) Each 1394A fully compliant cable port supporting 100/200/400Mps. 2) Compliant with 1394 OpenHCI Sepcification V1.0 and V1.1. 3) Compliant with PCI Specification V2.2. 4) Compliant with PCI Bus Power Management Specification V1.1. 5) Full support Play and Plug. 6) Supported by Microsoft Windows98/ME/XP/2000 and MacOS9.0 operating system.
Hardware installation Installing this card into your computer is a simple process, just simply follow these steps :
1 )urn off your computer and all external devices. 2) Disconnect your computer from the power sources. 3) Open the computer case. Refer to your computer user manual for more details.
4) Find an available PCI slot and remove the slot bracket, Save the bracket screw
for late use. 5) Align the IEEE 1394 PCI Card horizontally with respect to the PCI slot and insert
it into the slot firmly and evenly. Take care not to force it into the slot.
Once you have properly positioned the IEEE 1394 PCI Card into the slot, fasten
it to the computer case with the bracket screw you have saved.
USB card
5ports USB card -VIA chipset
PCI to USB card with advanced features compatible with Microsoft USB drivers (Windows
95/98/Me/2000) and Mac
Chipset: Ali Compliant with USB 2.0, PCI 2.0 and OHCI 2.0 USB ports Per-port output current 500mA with over-current detection and protection 32-bit 33MHz PCI interface Supporting up to 127 devices over an industry standard USB Compatible with 4-wire cable Manage data transmission Low speed (1.5Mbps), full speed (12Mbps), control, interrupt, bulk, and isochroous
transfers
With complete reliable drivers that interface with all major USB devices Supporting all USB-compliant keyboard, mouse, monitor, scanner, printer, telephone,
CD-ROM drive, joystick, virtual reality helmet, modem, PBX, game devices, etc.
Compatible with virtually all 486, Pentium, and Pentium Pro PCI-based motherboards
Complete 100% plug-and-play ready PCI 2.0 compliant and PC97 compliant
serial card
PCI Specification Revision 2.1 compliant
ompatible with standard 16C550 UART with 16 byte transmit-receive FIFO
Fast data rates up to 1 Mbytes/sec
DB9 serial port connector
Pin header serial port connector
Chinfo PCI to Serial 4-port host controller card
One rear bracket with two DB9 serial port connectors
User's manual
Software driver disc x 1
parellel card
Product: PCI to DB25 parallel card, MOSCHIP MCS9805 chip 1)chipset: MOSCHIP MCS905 2) .PCI Specification Revision 2.1 compliant 3)SPP, PS2, EPP, ECP compatible IEEE 1284 printer port 4)Fast data rates up to 1.5Mbytes/sec 5)Built in 16 Byte FIFO6.DB25 parallel port connector x 1
